Admixia aide les producteurs de béton, centrales et bureaux d’ingénieurs à déployer les nouveaux ciments bas carbone : formulation, compatibilité ciment–adjuvant, validation en production.Admixia helps concrete producers, ready-mix plants and engineering firms deploy the new low-carbon cements: mix design, cement–admixture compatibility, validation in production.
Un béton suisse courant (sorte NPK A) émet environ 184 kg CO₂-eq/m³ avec un CEM II/B ordinaire, selon le calculateur ecobau (v7.3, 2026). Près de 90% vient du ciment : le levier carbone, c’est le choix du ciment.
Les ciments bas carbone sont arrivés : argile calcinée (LC3), fines recyclées (type CEM II/C-M), ciments composites à bas clinker. Mais « bas carbone » ne dit presque rien du chiffre réel : sur un même béton, ces nouveaux ciments s’étalent d’environ 139 à 168 kg CO₂-eq/m³ selon le produit, parfois à peine mieux qu’un bon CEM II/B. Le CEM III/B au laitier descend à 106, le plus bas, mais il est peu disponible en Suisse (pas de laitier local).
Et chaque liant se comporte différemment en production. Les enjeux réels du terrain : maintenir l’ouvrabilité, garder un dosage en liant bas, valoriser les additions et incorporer un maximum de granulats recyclés en restant conforme (SIA 2030, Minergie-ECO), tenir les délais de démoulage au fil des saisons. Un système d’adjuvants choisi sur catalogue tient rarement tout cela à la fois ; le produit devient alors un risque, et l’on revient à la recette éprouvée. L’étiquette ne vous dit ni l’empreinte réelle, ni comment le faire tenir dans vos conditions.
Les granulats recyclés jouent sur un autre tableau : circularité, préservation des ressources, moins de mise en décharge. Leur effet direct sur le GWP reste inférieur à 1 kg/m³. Nécessaire, mais ce n’est pas le levier carbone.
Choisir le bon ciment pour votre cas, et le valider dans vos conditions. C’est le métier d’Admixia.
On the ecobau calculator basis (v7.3, 2026), a standard Swiss concrete (NPK A) emits about 184 kg CO₂-eq/m³ with an ordinary CEM II/B. Nearly 90% of that is the cement: the carbon lever is the cement choice.
Low-carbon cements have arrived: calcined clay (LC3), recycled fines (CEM II/C-M type), low-clinker composite cements. But “low-carbon” tells you almost nothing about the real number: on the identical mix these new cements span roughly 139 to 168 kg CO₂-eq/m³ depending on the product, sometimes barely better than a good CEM II/B. Slag CEM III/B goes down to 106, the lowest, but it is scarce in Switzerland (no local slag).
And every binder behaves differently in production. The real field issues: keeping workability, keeping binder content low, making SCMs work and incorporating as much recycled aggregate as the mix can take while staying compliant (SIA 2030, Minergie-ECO), holding demoulding times through the seasons. An admixture system picked from a catalogue rarely holds all of that at once; the product becomes a liability, and plants go back to the mix they trust. The label tells you neither the real footprint nor how to make it perform in your conditions.
Recycled aggregates play a different role: circularity, resource preservation, less landfill. Their direct GWP effect is under 1 kg/m³. Necessary, but not the carbon lever.
Choosing the right cement for your case, and validating it in your conditions. That is Admixia’s job.
Développement et ajustement de formulations béton et mortier : performances mécaniques, rhéologie, robustesse du procédé. Travail en conditions réelles, pas uniquement en laboratoire.Development and adjustment of concrete mix designs and mortar formulations: mechanical performance, rheology, process robustness. Work under real production conditions, not just in the lab.
Études de compatibilité pour superplastifiants (PCE), retardateurs et accélérateurs. Diagnostic des pertes d’ouvrabilité et des dérives de performance liées à la variabilité des constituants, y compris les reformulations d’adjuvants. Nous optimisons pour votre combinaison réelle : ciment, additions, adjuvant, température. Pas pour un cas générique.Compatibility studies for superplasticizers (PCE), retarders and accelerators. Diagnosis of slump loss and performance drift caused by variability of constituent materials, including admixture reformulations. We optimise for your actual combination: cement, SCMs, admixture, temperature. Not for a generic case.
Accompagnement technique pour le passage au CEM III, CEM ZN-D, CEM II/C-M (LC3) ou autres liants à bas clinker. Validation des performances, ajustement des dosages en centrale et sur chantier, anticipation des risques : délais de décoffrage et de démoulage, résistances au jeune âge et finales, effets de saison.Technical support for transition to CEM III, CEM ZN-D, CEM II/C-M (LC3) or other low-clinker binders. Performance validation, dosage adjustment at the plant and on site, anticipating production risks: demoulding times, early-age and final strength, seasonal effects.
Accompagnement technique pour intégrer granulats recyclés (RC-C, RC-M) et ressources secondaires dans des formulations compatibles avec les exigences de performance, de traçabilité et de conformité du projet (SIA 2030, Minergie-ECO).Technical support for integrating recycled aggregates (RC-C, RC-M) and secondary materials into formulations consistent with project performance, traceability, and compliance requirements (SIA 2030, Minergie-ECO).
Décrivez votre cas : ciment, adjuvant, contraintes de chantier. On regarde ensemble si un mandat a du sens.Describe the case: cement, admixture, site constraints. We’ll work out together whether a mandate makes sense.
Parler à AdmixiaTalk to AdmixiaDerrière Admixia, un savoir-faire construit au fil des années dans des environnements de R&D et d’innovation : développement d’adjuvants et de matériaux cimentaires, des dizaines de produits mis sur le marché, des centaines d’essais industriels et de terrain, des milliers d’essais de laboratoire, sur plusieurs continents.
À cela s’ajoute une connaissance directe du marché suisse, acquise dans la recherche appliquée : projets Innosuisse et chèques d’innovation pour la construction, participation à des travaux de normalisation.
Admixia met aujourd’hui cette expérience au service de mandats indépendants, avec une structure volontairement légère. Au sens strict : aucun accord d’exclusivité avec un producteur de ciment ou d’adjuvants ; les recommandations reposent sur les données et les résultats.
Ateliers techniques sur la compatibilité ciment–adjuvant, le déploiement de liants à bas clinker et l’interprétation des données GWP.
Behind Admixia is know-how built over many years in industrial R&D and innovation environments: admixture and cementitious-materials development, dozens of products taken to market, hundreds of plant and field trials, thousands of lab tests, on several continents.
It is paired with first-hand knowledge of the Swiss market, built in applied research: Innosuisse projects and innovation cheques for the construction sector, participation in standardisation work.
Admixia now brings that experience to independent mandates, with a deliberately lean structure. In the strict sense: no exclusivity agreements with any cement or admixture producer; recommendations based on data and results.
Technical workshops on cement–admixture compatibility, low-clinker binder deployment, and the interpretation of GWP data.
Ce qui est au catalogue et ce qui est réellement disponible dans votre région ne coïncident pas toujours. BetonMap vise à rendre cet écart visible : quels types de ciment sont disponibles où, et quels niveaux de GWP les données accessibles permettent d’observer.
Un outil de transparence pour les prescripteurs et les producteurs, construit d’abord sur des données de marché, puis enrichi progressivement par des données de terrain issues des mandats.
What’s in the catalogue and what’s actually available in your region are not always the same. BetonMap aims to make that gap visible: which cement types are available where, and what GWP levels can be read from the accessible data.
A transparency tool for specifiers and producers, built first on market data and progressively enriched by field data generated through project mandates.
Découvrez l’aperçu sur betonmap.ch.See the preview at betonmap.ch.
Admixia Sàrl · Vaud, SuisseAdmixia Sàrl · Vaud, Switzerland
Décrivez votre projet en deux lignes. Nous revenons vers vous généralement sous 48 h.Describe your project in a couple of lines. We usually get back to you within 48 hours.